lead-free parts pb surface mount tape and reel ligitek electronics co.,ltd. property of ligitek only data sheet ldbk9033/tr1 doc. no : qw0905-ldbk 9033/tr1a rev. : a date : 04 - aug - 2005
2.16 0.3 ligitek electronics co.,ltd. property of ligitek only page 1/7 package dimensions carrier type dimensions polarity note : 1.all dimension are in millimeter tolerance is ? 0.2mm unless otherwise noted. 2.specifications are subject to change without notice. note : the tolerances unless mentioned is ? 0.2mm,angle ? 0.5. unit=mm. part no. ldbk9033/tr1 cathode 2.5 4.6 ? 0.5 3.32 1.75 5.5 120.3 4.85 2.8 0.16 9.3 0.7 0.4 1.4 1.5 4.0 4.0 2.0 r 1.9 0.4 ? 0.1 2.0 0.5 ? 0.1
part no. ldbk9033/tr1 ligitek electronics co.,ltd. property of ligitek only 2/7 page reel dimensions 16.0 ? 1.0 74.0 ? 1.5 14.2 ? 1.0 1500 devices quantity/reel description 12.0mm tape,7"reel ldbk9033/tr1 part no. r 178 ? 2.0
electrostatic discharge esd 150 v min. 160 max 260 j for 5 sec max (2mm from body) luminous intensity @20ma(mcd) color water clear note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. ldbk9033/tr1 part no emitted ingan/gan blue material dominant wave length f dnm lens 470 max. typ. 3.5 30 4.0 forward voltage @20 ma(v) spectral halfwidth ??f nm typical electrical & optical characteristics (ta=25 j ) storage temperature soldering temperature operating temperature tstg tsol t opr -30 ~ +100 -20 ~ +80 typ. 20 300 viewing angle 2 c 1/2 (deg) j j ligitek electronics co.,ltd. property of ligitek only absolute maximum ratings at ta=25 j reverse current @5v power dissipation peak forward current duty 1/10@10khz forward current parameter ldbk9033/tr1 part no. ir pd i fp i f 50 120 100 30 symbol ratings dbk g a mw ma ma unit page 3/7
fig.5 relative intensity vs. wavelength typical electro-optical characteristics curve ligitek electronics co.,ltd. property of ligitek only 1.0 3.0 4.0 0 1 1.0 relative intensity@20ma wavelength (nm) 450 0.0 400 500 550 0.5 0.5 relative intensity@20ma normalize @25 j forward voltage@20ma normalize @25 j 20 ambient temperature( j ) ambient temperature( j ) 0 -20 -40 0.8 0 -40 -20 100 80 60 40 20 0.0 60 100 80 40 fig.4 relative intensity vs. temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 fig.3 forward voltage vs. temperature 1.2 3.0 relative intensity normalize @20ma forward current(ma) forward current(ma) forward voltage(v) 2.0 5.0 1 10 0.0 0.5 1.0 1.5 2.0 100 1000 fig.2 relative intensity vs. forward current fig.1 forward current vs. forward voltage 2.5 3.0 1 10 100 1000 dbk chip part no. page 4/7 ldbk9033/tr1 0 x 60 x 30 x -60 x -30 x 100% 75% 25% 25% 0 50% 100% 75% 50% fig.6 directive radiation
part no. ldbk9033/tr1 page 5/7 ligitek electronics co.,ltd. property of ligitek only 245 ? 5 j within 5 sec soldering heat max. 260 j cooling -5 j /sec time 5sec 260 c max. 10sec.max 1~5 c/sec preheat 180~200 c above 220c 60 sec.max. 2. wave solder 120 ~ 150 j temp. ( j ) preheat 240 3-1. lead reflow solder 120 1~5 c/sec 3-2 pb-free reflow solder 150 reflow soldering should not be done more than two times. 120 sec.max. 60 ~ 120 sec rising +5 j /sec preheat 120 ~ 180 sec recommended soldering conditions 1. hand solder basic spec is ?? 280 j 3 sec one time only.
part no. ldbk9033/tr1 6/7 page ligitek electronics co.,ltd. property of ligitek only circuit model b precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh60%, they should be treated at 60 j? 5 j fo r 15hrs. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value. circuit model a led led esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led.
part no. ldbk9033/tr1 7/7 reference standard test condition test item reliability test: classification 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=1000hrs ? 2hrs 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles operating life test low temperature storage test high temperature storage test endurance test high temperature high humidity storage test thermal shock test 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) ligitek electronics co.,ltd. property of ligitek only page mil-std-883d:1008 jis c 7021: b-10 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 mil-std-202f:103b jis c 7021: b-11 jis c 7021: b-12 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 1.t=260 c max. 10sec.max. 2. 6 min 1.105 j ~ 25 j ~ - 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles temperature cycling ir reflow environmental test mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-750d:2031.2 j-std-020 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 solderability test 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.coverage ? 95% of the dipped surface
|
